Benvenuto! Oggi è il 19/2/2019

Clear body Abarth 500 full of stickers and accessories, produced by the Italian manufacturer Italtrading.

Code: EZQR10520
Shop: Minizracing

Clear body Lancia Delta S4 full of stickers and accessories, produced by the Italian manufacturer Italtrading.

Code: EZRL2435
Shop: Minizracing

Last week-end on 26,27,28 March, 2015 to Wels in Austria it was held the firstPNEC 2015 (PN Racing European Championship) for
Mini-Z.
It was organised by Stadler Philipp, Huemer Walter drivers of the club KRC-Dietach (www.krc-dietach.at) and PN Racing (www.pnr.cc).
The sponsors of the event were the clubs MRCW4 and RCLAA, Kyosho, Minizracing.it, Marka Racing, RC Orange, Jomurema, TRP, Robbe.de, SRCC-Devils.

About 70 drivers from all the Europe and United States, raced to win the European title of the five various categories, 2wd Stock, Le Mans Pro Stock, F1 Pro Stock, Pan Car Modified and GT Modified.

The competition lasted two days, during the first day there were four rounds of qualification for every category and during the second day there were the three finals for every category.

Here is the link of the results
http://www.myrcm.ch/myrcm/main?pLa=de&hId%5B1%5D=arv&dId%5BE%5D=20187&pId%5BE%5D=1

Stock 2wd TQ and clean sweep for Nico Haider (Marka Racing) who won the title getting the first two finals from three one, the second place
went to David Duret (RC Orange) and the third place to Walter Huemer (KRC-Dietach).

Le Mans Pro Stock this race was fought until the last lap and for only 3 seconds was won by the German driver Nicolai BÄHR came before the Italian driver Riccardo Giannini (Marka Racing), the third place went to Karsten Dose.

F1 Pro Stock was won by the German driver Michael Skrotzki, the second place Martin Jankowsky and the third place Michael Pauls.

Pan Car Modified was a tighten race between three various drivers who contendend the victory, the first place of the last finals went to Carlos Guerreiro (PN Racing/RC Orange),
the second place to Grant Matsushima (PN Racing) and the third place to Alessio Pernite (Marka Racing).

GT Modified Carlos Guerreiro (PN Racing), being already World Champion, French and Belgium Champion, won the title of the European Champion as well,
the second place went to Grant Matsushima (PN Racing), and the third place went to the Austrian driver Nico Haider (Marka Racing), the fourth place won by MR Philip NG (Pn Racing).

It was three days of pure racing, full of great spirit of friendship, aggregation and absolute fun.

Team Marka Racing Italia

I assure you the atmosphere witch is during Mini-Z events is unique!

Source Marka Racing & Minizracing.it

Comming soon!
Marka Racing will produce Miniz tires for RCP track!
The tests are finished successfully.

At the end of February will be ready!
Stay tuned!
www.markaracing.com
www.minizracing.it

Finally arriving in Italy the new AMZ 2WD produced by RC Atomic, the car RTR will be available from mid-February.

Specification
- Height: 31mm
- Width: 66mm
- Length: 128mm
- RTR Weight: 118 gram (Body not included)
- Wheelbase: 98mm (default)

Features
- 2 wheel drive with RMR layout
- Front and rear double swing arm with free rear camber angle camber tune.
- Pre-set for front caster angle tune.
- Accept rear toe angle tune.
- Sealed gear differential.
- Full ball bearing drive train
- 2.4Ghz FHSS controller with precision handing brushless speed control by HW (HobbyWing)

Code: AMZ001-2WD
Source: Atomic RC
Official dealer: Minizracing

The Marka Racing batteries have a high level voltage under load, with a low internal resistance.
Marka cells are placed in a very hard case very of black color that protects them from shocks.
Marka battery can be connected using gold connectors of 4mm.
These batteries have passed the necessary certifications for air transport.

Specification
Number of cells: 2 (2S+2P)
Type: Shorty
Voltage: 7,4V
Capacity: 4700mAh
C-rate: 100C
Plug: 4mm gold plug
Type: Rectangular
Weight: 210g

Code: MRK-LI4700

The batteries Marka Racing have a high level voltage under load, with a low internal resistance.
Marka cells are placed in a very hard case very of black color that protects them from shocks.
Marka battery can be connected using gold connectors of 4mm.
These batteries have passed the necessary certifications for air transport.

Specification
Number of cells: 2 (2S+2P)
Voltage: 7,4V
Capacity: 6000mAh
C-rate: 100C
Plug: 4mm gold plug
Type: Rectangular
Weight: 285g

Code: MRK-LI6000

The Marka Racing batteries have a high level voltage under load, with a low internal resistance.
Marka cells are placed in a very hard case very of black color that protects them from shocks.
Marka battery can be connected using gold connectors of 4mm.
These batteries have passed the necessary certifications for air transport.

Specification
Number of cells: 2 (2S+2P)
Voltage: 7,4V
Capacity: 7200mAh
C-rate: 100C
Plug: 4mm gold plug
Type: Rectangular
Weight: 310g

Code: MRK-LI7200

In January will be ready the new AMR produced by RC Atomic.
The car is a model touring 2WD in scale 1:27.

www.minizracing.it

The floatable motor cooling fan mount is designed, made and distributed by Marka Racing.
The cooling fan mount made from solid high quality Ergal 7075 aluminium is machined by means of high precision CNC (computer numerical control) machinery.
This fan mount has been thought for radio controlled race cars 1/10th Yokomo BD5/BD7.

Marka Racing fan mount can be installed onto the original hole of Yokomo BD5/BD7 2014 chassis but for Yokomo BD7 2015 it must be used by making a hole into the chassis.
The fixing action to the chassis needs only one screw (avoiding any kind of interference with the chassis’ flexibility).
With this fan mount is possible to raise and lower the fan by means of a screw.

Marka Racing fan mount is compatible with most of fans on the market: 25, 30, 35 and 40 mm.
The bigger fans (35 and 40mm) may be anchored using 2 screws while smaller fans (25 and 30 mm) can be fixed using only one screw (helping the reduction of weight).
This product is extrelmely light (2.3gr) and tough, making it the perfect accessory for an easy and crash-proof job!

Sales package includes: one Ergal 7075 black anodized motor cooling fan mount, one screw for fixing onto the chassis and one screw witch allows you to raise and lower the arm where it is fixed the fan.
Screws for fixing the fan to the mount are not included.

The motor cooling fan mount by Marka Racing is proudly designed, produced and packaged in Italy.

Code: MRK-1031-K